Toyota Camry Hybrid AHV40 Manual page 281

BE-20
3. Interior Light Control
D The interior light control (interior light and power switch illumination) consists primarily of the
fade-in/fade-out function and timer illumination function.
D The interior light control activates as described in the diagram below when one of items is in the respective
state.
D This control is controlled by the main body ECU.
Condition
Condition (1)
Condition (2)
Condition (3)
Condition (4)
Condition (5)
*: The function setting can be changed using the customized body electronics system. For details, refer to
Customized Body Electronics System section on page BE-11.
4. Battery Saving Control
When the following two conditions have been met, battery saving control turns off the lights illuminated by
the illuminated entry controls. Battery saving control is controlled by the main body ECU.
D The key is not in the actuation area.
D There is no change in the condition of the doors for 20 minutes.
BODY ELECTRICAL - LIGHTING
Condition (2)
Condition (4)
Condition (3)
Condition (5)
D With power source OFF and all doors closed, any door is unlocked.
D With all doors closed, power source is changed from ACC to OFF.
D With power source OFF and all doors closed, key enters any actuation area
around the doors.
D Any door is open.
D With power source OFF and any door unlocked, an open door is closed.
D Power source is ACC, IG-ON or READY.
D More than 15 seconds have elapsed since the Light ON State (15 second
duration)*.
D With power source OFF and all doors closed, all doors are locked.
D With power source ACC, IG-ON or READY, all doors are closed.
D With power source OFF and all doors closed, all doors are locked.
Light OFF State
Condition (1)
Light ON State
(During 15 Second)*
Condition (2)
Light ON State
(Constantly ON)
Item
241BE32