Toyota Camry Hybrid AHV40 Manual page 176

Table of Contents

Advertisement

CHASSIS - TIRE PRESSURE WARNING SYSTEM
3. Tire Pressure Warning System Reset Switch
D By operating the tire pressure warning system reset switch, tire pressure warning system ECU can be set
to issue a warning at an inflation pressure that corresponds with the type of tires. Therefore, the dealer must
set the warning threshold to the proper value in order to comply with the local regulations.
D Operate the tire pressure warning system reset switch only after the inflation pressures of all 4 tires have
been adjusted on the vehicle.
D To initialize the system, press and hold the tire pressure warning system reset switch for 3 seconds or longer
with the power switch turned IG-ON. When starting the initialization, the tire pressure warning light blinks
3 times at 0.5 Hz.
D During the initialization, the tire pressure warning system valve & transmitter measures the inflation
pressure of the tires, and registers the signals that are transmitted into the ECU at a frequency of 1 per
minute. The initialization process is completed when the signals from the tires have been received.
D Once the tire pressure warning system reset switch has been pressed, turning OFF the power switch is not
recommended for a few minutes.
Service Tip
D Since the initialized values are dependent upon the accuracy of the tire pressure gauge to be used,
use a tire pressure gauge that has been properly calibrated.
D The system must be initialized in the following conditions:
1) New vehicle delivery
2) Replacement with tires of different size (inflation pressure)
3) Tire pressure warning system ECU replacement
CAUTION
If the system is initialized with tires whose inflation pressure deviates from the threshold pressure,
the system can be initialized at those values. Therefore, initialize only after the tires have been inflated
to the specified air pressure.
4. Tire Pressure Warning Light
D The tire pressure warning light is located in the combination meter.
D This warning light illuminates or blinks in accordance with signals from the tire pressure warning system
ECU if the vehicles own tires are inflated with low pressure or if malfunction occurs in the system.
Tire Pressure Warning Light
025CH62TE
CH-75

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents