Toyota Camry Hybrid AHV40 Manual page 355

BE-94
6. Start Function Operation
General
The start function has different power source patterns to suit the brake pedal state and shift lever position.
Pattern Brake Pedal
A A Depressed Depressed
B B
Not Depressed Not Depressed
C C
D D —
E E —
"
Transition of Power Source
Shift Position
Pattern
Power Switch
Brake
Hour
OFF
ACC
Power
Source
IG
READY
: Transition
: Only when the key certification is OK
: Only when the vehicle is stopped
NOTE: Normally, the operation of the power switch is disabled while the vehicle is being driven. However,
in an emergency, by pressing the power switch for approximately 3 seconds or more, the driver can stop
the THS II (The power switch changes from READY ! ACC).
BODY ELECTRICAL - SMART KEY SYSTEM
Shift Lever
P Position P Position
P Position P Position
Except P Position Except P Position
P Position P Position
Except P Position Except P Position
A
P
B or D A or D
Push Push
— Depressed
— —
Power Source Pattern
When the power switch is pushed once. When the power switch is pushed once.
D OFF ! READY ON (THS II is start)
Each time the power switch is pushed. Each time the power switch is pushed.
D OFF ! ACC ! IG-ON ! OFF
Each time the power switch is pushed. Each time the power switch is pushed.
D OFF ! ACC ! IG-ON ! ACC
When the power switch is pushed once. When the power switch is pushed once.
D IG-ON or READY ON ! OFF
When the power switch is pushed once. When the power switch is pushed once.
D IG-ON or READY ON ! ACC
— C or E
— Push
— —
After
—
1 hour
Except P
—
Push
Depressed
—
02HBE59TE