Toyota Camry Hybrid AHV40 Manual page 371

BE-110
Entry Unlock Mode Switching
a) When the power source is OFF, press the lock button and one of the other three buttons on the key at the
same time for approximately 5 seconds while the key is in the actuation area.
b) The certification ECU receives this signal from the tuner and switches the entry unlock mode.
c) The certification ECU sounds the wireless door lock buzzer and the buzzer of the combination meter to
inform the user that the mode has been switched.
d) If the entry unlock mode needs to be switched again, press the lock button and one of the other three
buttons on the key at the same time for approximately 5 seconds after the LED of the key goes off.
Mode Wireless Door Lock Buzzer
Driver Door
(Default)
All Doors
(Customized)
NOTE:This function only switches the entry unlock mode of the smart key system. It is not applied to the
unlock function using the wireless door lock remote control.
BODY ELECTRICAL - SMART KEY SYSTEM
b)
c)
Certification
ECU
c)
CAN
(MS Bus)
Sounds three times
Sounds twice
a)
Tuner
Wireless Door
Lock Buzzer
Main Body ECU
CAN (CAN No.1 Bus)
Combination Meter
D Buzzer
Buzzer in
Combination Meter
Sounds once
Sounds once
Key
025BE94P
Multi-information
Display
025BE126TE