Toyota Camry Hybrid AHV40 Manual page 287

BE-26
3. Illumination Control
D When the power source is switched to IG-ON, the illumination control operates as follows (1, 2):
D When the power source is switched to OFF, the illumination control is as follows (3):
1) The needles of the fuel expense meter, speedometer, fuel gauge and engine coolant temperature gauge
illuminate, and "HYBRID SYNERGY DRIVE" appears on the multi-information display at the same time
as the meter ring illuminates.
Engine Coolant Temp.
Gauge Needle
Speedometer Needle
Fuel Expense Meter Needle
2) The meter illumination gradually fades in after the meter ring and the multi-information display
illuminate. Then the meter ring illumination turns off.
3) All illuminations other than the multi-information display go off, and "ECO DRIVE LEVEL" appears on
the multi-information display. The meter ring illuminates in accordance with the indicated "ECO DRIVE
LEVEL". Then "ECO DRIVE LEVEL" disappears and the multi-information display turns off.
BODY ELECTRICAL - METER
Fuel Gauge Needle
Fade-in condition
Meter Ring
Multi-information Display
02HBE11Y
02HBE12Y
02HBE13Y