Toyota Camry Hybrid AHV40 Manual page 35

6. Power Cable
The power cable is a high-voltage, high-amperage cable that connects the HV battery module with the
inverter, the inverter with MG1 and MG2, and the inverter with the electric inverter compressor. The power
cable starts at the connector of the junction block of the HV battery, which is located behind the rear seat.
It passes under the floor panel, along the side of the floor reinforcement, and connects to the inverter in the
engine compartment. The power cable is shielded in order to reduce electromagnetic interference.
For identification purposes, the high-voltage wiring harness and connectors are color-coded orange to
distinguish them from those of the ordinary low-voltage wiring.
Electric Inverter
Engine
Compressor
Inverter
Assembly
THS II (TOYOTA HYBRID SYSTEM II)
Hybrid
Transaxle
Junction
Block
DC/DC Converter
TH-35
Service Plug
HV Battery
02HTH33Y