Placing Calls To Contacts - Yealink SIP-T48S User Manual

User Guide for the SIP-T48S IP Phone
When you place a call to the contact or receive a call from the contact, the touch screen will
display the contact photo.

Placing Calls to Contacts

To place a call to a contact from the local directory:
Tap .
1.
The IP phone enters the local directory directly as there is only Local Directory enabled in
the directory by default.
If Local Directory is removed from the directory (refer to
->Directory->All Contacts to enter the local directory.
Tap the desired contact.
2.
If the contact was added to a specified contact group, you can tap the contact group first,
and then tap the desired contact.
- If only one number for the contact is stored in the local directory, the contact number
will be dialed out.
If multiple numbers for the contact are stored in the local directory, the touch screen
-
82
Directory on page 68), tap