Block Out - Yealink SIP-T48S User Manual

User Guide for the SIP-T48S IP Phone
For more information on the valid values for the Account field, refer to
page 122.
Click Confirm to accept the change.
4.
Note
The default value of minimum and maximum length is 1 and 15 respectively.

Block Out

You can block some specific numbers (up to 10) from being dialed on your phone. When you
dial a block out number on your phone, the dialing will fail and the touch screen will prompt
"Forbidden Number".
To add a block out number via web user interface:
Click on Settings->Dial Plan->Block Out.
1.
Enter the desired value in the BlockOut NumberX field.
2.
Enter the desired line ID in the Account field or leave it blank.
3.
For more information on the valid values for the Account field, refer to
page 122.
Click Confirm to add the block out number.
4.
Note Block out number is configurable via web user interface only.
126
Replace Rule on
Replace Rule on