Key As Send; Phone Lock - Yealink SIP-T48S User Manual

Key As Send

You can set the "#" key or "*" key to perform as a send key while dialing.
To configure key as send via phone user interface:
Tap ->Features->General.
1.
Tap the gray box of the Key As Send field, and then select # or * from the pull-down list, or
2.
select Disabled to disable this feature.
Tap the Save soft key to accept the change or
3.
Key as send is configurable via web user interface at the path Features->General Information.

Phone Lock

You can lock your phone temporarily when you are not using it. This feature helps to protect
your phone from unauthorized use.
When the phone is locked, the following you needed to know:
All keys are locked except the Volume key, digit keys, # key, * key and Speakerphone key. You
are only allowed to dial emergency numbers, reject incoming calls by pressing the X key or
tapping the Reject soft key, answer incoming calls by lifting the handset, pressing the
Speakerphone key, the HEADSET key, the OK key or tapping the Answer soft key, and end the
call by hanging up the handset, pressing the Speakerphone key, X key or tapping the End Call
soft key.
The emergency number setting, if desired, must be made before lock activation. For more
Note
information, refer to Emergency Number on page 127.
Customizing Your Phone
to cancel.
59