Anonymous Call - Yealink SIP-T48S User Manual

User Guide for the SIP-T48S IP Phone
You can also configure a DSS key as a group pickup key via phone user interface or web user
interface. Once configured, you can pick up a call by tapping the group pickup key directly. For
more information, refer to
The directed call pickup code and group call pickup code are predefined on the system server.
Note
Contact your system administrator for more information.
The call pickup code configured on a per-line basis takes precedence over that configured on a
global basis.

Anonymous Call

You can use anonymous call to block your identity and phone number from appearing to the
called party when you call someone. For example, you want to call to consult some of the
services, but don't want to be harassed. Anonymous call is configurable on a per-line basis. You
can also configure the phone to send anonymous call on/off code to the server to
activate/deactivate anonymous call on the server side.
Note Anonymous call is not available on all servers. Contact your system administrator for the
anonymous call on code and off code.
To configure anonymous call via phone user interface:
Tap ->Features->Anonymous.
1.
Tap the desired line.
2.
Tap the On radio box of the Local Anonymous field.
3.
(Optional.) Tap the On Code or Off Code radio box of the Send Anony Code field.
4.
(Optional.) Enter the anonymous call on code and off code respectively in the On Code and
5.
Off Code field.
The phone will send the configured on code or off code depending on your selection when
you enable or disable anonymous call feature on the phone.
178
DSS Keys on page 106.