Yealink SIP-T48S User Manual page 197

To perform a blind transfer:
Tap the BLF key of the monitored user which you want to transfer this call to.
1.
Then the active call is connected to the number of the monitored user.
When the transfer mode on DSS key is set to Attended Transfer and there is already an active
call on the IP phone, you can do the following:
To perform a semi-attended transfer:
Tap the BLF key of the monitored user which you want to transfer this call to. The phone
1.
will dial the number of the monitored user.
Tap the BLF key of the monitored user again or the Transfer soft key to complete the
2.
transfer when receiving ringback.
To perform an attended transfer:
Tap the BLF key of the monitored user which you want to transfer this call to. The phone
1.
will dial the number of the monitored user.
Tap the BLF key of the monitored user again or the Transfer soft key to complete the
2.
transfer after the monitored user answers the call.
When the transfer mode on DSS key is set to New Call and there is already an active call on the
IP phone, you can do the following:
To perform a new call:
Tap the BLF key of the monitored user you want to call.
1.
The phone will dial the number of the monitored user.
Picking up an Incoming Call of the Monitored User
When the monitored user receives an incoming call, the BLF key icon indicator of the monitored
user will become
phone will play a specific ring tone (refer to
information on the screen. You can use the BLF key to pick up an incoming call of the monitored
user. Before picking up an incoming call, ensure that the directed call pickup code has been
configured in advance.
To pick up an incoming call when the IP phone is idle:
Tap the BLF key.
1.
The incoming call of the monitored user is answered on the IP phone.
Note If the directed call pickup code is not configured, the phone will place a call to the monitored
user instead of picking up an incoming call of the monitored user when you press the BLF key.
and flash. If you enable visual and audio alert features on the phone, the
BLF Ring
Advanced Phone Features
Type) and display the incoming call
187