Using Bla Feature On The Ip Phone - Yealink SIP-T48S User Manual

User Guide for the SIP-T48S IP Phone

Using BLA Feature on the IP Phone

This section provides you with detailed information on using the SIP-T48S IP phone in a BLA
scenario. In a BLA scenario, the status of the line key icon which associates with a bridged line
will change. For more information on line key icon indicators, refer to
with a bridged line)
You can do the following using the IP phone in a BLA scenario:
Placing calls

Answering calls

Place a call on hold

Retrieving a held call

Placing Calls
You can have one call or multiple calls on the bridged line.
To place a call on the bridged line:
Do one of following:
Enter the desired number using the keypad when the phone is idle.
-
Press
The phone will dial the entered number.
- Tap the line key when the phone is idle to enter the dialing screen.
Enter the desired number using the keypad and then press
The phone will dial the entered number.
To place multiple calls on the bridged line:
You can have more than one call on the bridged line. To place a new call when there is an active
call on phone A, do one of the following on the phone A:
- Press
Tap the New Call soft key to enter the dialing screen.
Enter the desired number using the keypad.
Press
Phone A will dial the entered number.
- Tap the line key. The original call is placed on hold.
Enter the desired number using the keypad.
Press
Phone A will dial the entered number.
234
on page 9.
, , or tap Send.
or tap the Hold soft key. The original call is placed on hold.
, , or tap Send.
, , or tap Send.
Icon indicator (associated
, , or tap Send.