Placing Calls - Yealink SIP-T48S User Manual

User Guide for the SIP-T48S IP Phone

Placing Calls

You can place a call in one of three ways using your SIP-T48S IP phone:
Using the handset

Using the speakerphone

Using the headset

You can also dial the number first, and then choose the way you want to speak to the other
party.
You can also dial an entry/contact from call history, local directory or remote phone book. For
more information, refer to
page 90.
During a call, you can alternate between Speakerphone, Headset, and Handset modes by
pressing the Speakerphone key, the HEADSET key, or by picking up the handset.
The call duration of the call and far-site's information (name or phone number) are visible on the
touch screen. In the figure below, the call to "Tom" (the phone number: 1039) has lasted 1
seconds.
To place a call using the handset:
Pick up the handset.
1.
Enter the desired number using the phone keypad.
2.
132
Contact Management on page 68 and Call History Management on