Using Blf Feature On The Ip Phone - Yealink SIP-T48S User Manual

User Guide for the SIP-T48S IP Phone
If you select New Call, tap the BLF key to place a new call to the monitored user.

Click Confirm to accept the change.
3.

Using BLF Feature on the IP Phone

You can use the BLF key in the following ways:
Place a call to the monitored user.

Transfer a call to the monitored user.

Pick up an incoming call of the monitored user.

Placing a Call to the Monitored User
You can tap a BLF key to dial out the monitored phone number when the monitored line is idle.
To place a call to the monitored user when the IP phone is idle:
Tap the BLF key.
1.
The IP phone dials out the phone number of the monitored user.
Transferring a Call to the Monitored User
When there is already an active call on the IP phone, you can transfer the active call to the
monitored user by tapping the BLF key. The phone handles the active call differently depending
on the transfer mode on DSS key (refer to
mode on DSS key has the following modes:
Blind Transfer

Attended Transfer

New Call

When the transfer mode on DSS key is set to Blind Transfer and there is already an active call
on the IP phone, you can do the following:
186
Configuring Transfer Mode on DSS Key). The transfer