Yealink SIP-T48S User Manual page 180

User Guide for the SIP-T48S IP Phone
To park a call in FAC mode:
During a call, tap the Park soft key (You may need to tap the More soft key to see the Park
1.
soft key) or press the call park key (if configured).
If the call park code is not configured, you need to enter the call park code.
-
Press
If the call park code is configured, the phone will dial the configured call park code
-
shown as below:
Do one of the following:
2.
If you want to park the call against the local extension.
a)
Press
1)
If the call is parked successfully, you will hear a voice prompt confirming that the
call is parked.
If you want to park the call against desired extension.
b)
Enter an extension (e.g., 4606) where you want to park the call.
1)
Press
2)
170
, or tap Park.
.
or .