Operation
LED Indicators
Indicator
Status
Green
The PDU status is ok.
Orange
Warning.
Status
Red
Critical.
Off
The PDU power is off.
On (Green)
The PDU power is on.
Tx/Rx
Receiving/transmitting data packet.
Flashing
Reset finished.
On
Indicates the PDU is connected to the LAN.
LINK
Off
Indicates the PDU is not connected to the LAN.
On
The outlet is on and providing power.
Outlet
Off
The outlet is off.
Environmental Monitoring (optional)
CyberPower PDUs along with the environment sensor (ENVIROSENSOR) provide
temperature and humidity monitoring in a server closet and/or datacenter
remotely. To connect the PDU with ENVIROSENSOR, use the RJ45 Ethernet Cable.
Plug one end into the Daisy Chain (In)/ENVIROSENSOR port on the PDU and the
other end into the RJ45 port on the ENVIROSENSOR (as shown below). When the
PDU correctly connects to the ENVIROSENSOR, users can see the temperature and
humidity data on the Web Interface.
Device Reset
•
To reset all the settings to default locally, use Reset function in the LCD
display.
•
To reset all the settings to default remotely, log in Web interface, enter the Reset
page and apply the function.
Unattended/Automatic Shutdown
PowerPanel Business Edition software automatically initiates a graceful shutdown
on the operating system. PowerPanel must be installed on every computer
or server for which the shutdown is to take place. The software will receive
a message from the PDU, and will perform the shutdown according to the
instructions provided, including shut downs at exact times and dates.
Step 1. PC Configuration
1. Install PowerPanel Business Edition Client on every computer or server that will
be part of the shutdown process (Follow the instructions in the PowerPanel
Business Edition User Manual).
2. Configure the settings in PowerPanel Business Edition Client. See the
PowerPanel Business Edition User Manual for additional help.
Step 2. PDU Configuration
Verify that the IP address of all computers that will be part of the shutdown
process, are included in the Client List of web interface.
Step 3. Notification
Notifying the computers of potential outlet shutdown can be accomplished using
the following methods:
14
©2016 Cyber Power Systems, Inc. All rights reserved.
Description