Table of Contents
Advertisement
Operation
LED Indicators
Indicator
Status
On (Green)
Tx/Rx
LINK
Outlet
Environmental Monitoring (optional)
CyberPower PDUs along with the environmental sensor
(ENVIROSENSOR) provide temperature and humidity monitoring
in a server closet and/or datacenter remotely. To connect the
PDU with ENVIROSENSOR, use the RJ45 Ethernet Cable included
with the ENVIROSENSOR. Plug one end into the Daisy Chain (In)/
ENVIROSENSOR port on the PDU and the other end into the RJ45
port on the ENVIROSENSOR (as shown in figure below). When the
PDU correctly connects to the ENVIROSENSOR, users can see the
temperature and humidity data via the Web Interface. For further
information regarding ENVIROSENSOR configuration, please refer
to the Intelligent PDU Web Interface User's Manual.
Device Reset
•
To locally reset all the settings to default, use Reset function in
the LCD screen.
•
To remotely reset all the settings to default, log in to the Web
interface, enter the Reset page and apply the function.
Unattended/Automatic Shutdown
PowerPanel® Business Edition (Client) software automatically
initiates a graceful shutdown on the connected computer's
operating system. PowerPanel must be installed on every computer
or server for which the shutdown is to take place. The computer will
receive a message from the PDU, and will perform the shutdown
according to the instructions provided, including shut downs at
exact times and dates.
Step 1. Computer Configuration
1. Install PowerPanel® Business Edition Client on every computer
or server that will be part of the shutdown process (Follow the
instructions in the PowerPanel® Business Edition User Manual).
2. Configure the settings in PowerPanel® Business Edition Client.
See the PowerPanel Business® Edition User Manual for detailed
instructions.
Step 2. PDU Configuration
Verify that the IP address of all computers that will be part of the
shutdown process, are included in the Client List on the web interface.
Status
Green
The PDU status is ok.
Orange
Warning.
Red
Critical.
Off
The PDU power is off.
The PDU power is on.
Receiving/transmitting data packet.
Flashing
Reset finished.
On
Indicates the PDU is connected to the
LAN.
Off
Indicates the PDU is not connected to
the LAN.
On
The outlet is on and providing power.
Off
The outlet is off.
Description
26
Advertisement
Table of Contents
