Environmental Monitoring (Optional); Led Indicators; Device Reset; Remote Management - CyberPower PDU15SW8FNET User Manual

Operation

Environmental Monitoring (optional)

CyberPower PDUs along with the environment sensor (ENVIROSENSOR) provide
the function of temperature and humidity monitoring in a server closet and/
or datacenter remotely. To connect the PDU with ENVIROSENSOR, use the RJ45
Ethernet Cable. Plug one end into the Serial/ENVIROSENSOR port on the PDU
and the other end into the RJ45 port on the ENVIROSENSOR (as shown in figures
below). When the PDU correctly connects to the ENVIROSENSOR, users can see
the temperature and humidity data on the Web Interface. For further information
regarding ENVIROSENSOR configuration please refer to the PDU Software
Installation CD.

LED Indicators

Indicator
Load
Tx/Rx
LINK
Outlet

Device Reset

• To reset all the settings to default except for the IP address, press and hold
the Reset Button for 3 seconds.
• To reset all the settings to default, press and hold the Reset Button for 6 seconds.

Remote Management

The remote management function of the CyberPower PDU provides for
monitoring the PDU vitals, controlling outlets, and utilizing SNMP functionality.
Remote management is performed via the web interface. To access the web
interface, please follow the instructions below:
1. Enter the IP address of the PDU into a web browser (Internet Explorer, Firefox).
2. Enter the user name and password of the PDU device at the authentication screen.
Note: The default username is "cyber" and the default password is "cyber".
For additional information about the features and functionality of CyberPower
Management Console, please refer to the PDU Software Installation CD.
18
YU0-0000033-01
- Normal
- Warning
- Overload
Amps
Volts
Select
KW
8
PDU20SWT8FNET
Reset
Status
Green The total PDU power load is normal.
Orange Near overload.
Red Overload.
Off The PDU power is off.
On(Green) The PDU power is on.
Receiving/transmitting data packet.
Flash
Reset finished.
On Indicates the PDU is connected to the LAN.
Off Indicates the PDU is not connected to the LAN.
On The outlet is on and providing power.
Off The outlet is off.
For more information on CyberPower products, visit www.CPSww.com
- Normal
- Warning
- Overload
Select
PDU20SWT8FNET
Tx/Rx
Link
Tx/Rx
Link
Description