Appendix A-Hyper Terminal; Appendix B-Power Device Network Utility; Overview; Installation - CyberPower PDU81001 User Manual

Appendix A-Hyper Terminal

Hyper Terminal software can be used for basic PDU configuration. It utilizes a text-
based interface and menu system. Navigation through the interface is done by
typing the number of the menu option and pressing the Enter key. For COM port
setting values, please refer to p.12 Option 4: Hyper Terminal or Terminal Emulator
section. Note: The session will timeout and logout after 3 minutes of inactivity.
Menu options are shown below:
[Main Menu]
1. Outlet Manager (Switched Series Only)
2. Network Settings
3. System Configuration
4. Account Settings
5. Configure System to Default
6. Logout
[Outlet Manager]
1. Outlet Control
2. Outlet Configuration
[Network Setting]
Physical MAC Address: 00-0C-15-40-08-A9
1. System IP: 192.168.24.20
2. Subnet Mask: 255.255.255.0
3. Default Gateway: 192.168.24.254
4. DHCP: Enabled
5. Http Port: 80
6. Http Access: Enabled
[System Configuration]
1. Date (mm/dd/yyyy) : 11/11/2011
2. Time (hh:mm:ss): 17:17:25
3. Name:PDU20SW8FNET
4. Contact: Administrator
5. Location: Server Room
[Account Setting]
1. Administrator
2. Viewer (Web Only)
[Configure System to Default]
Sure to Configure System to Default
1. Yes
2. No

Appendix B-Power Device Network Utility

Overview

The CyberPower Power Device Network Utility is an easy-to-use interface which is
used for establishing IP addresses on CyberPower PDU devices.

Installation

Step 1. Download the Power Device Network Utility software.
Step 2. Select Next in the software wizard (Shown in Figure 1.).
Figure 1.
18
©2016 Cyber Power Systems, Inc. All rights reserved.