Correct Posture And Position; Setting Date And Time - Hartmann Tensoval duo control Instructions For Use Manual

measured values recorded in the
memory will not be lost when
changing the batteries.
The date and time must be reset.

3.2 Correct posture and position

Measurements can be taken on
the right or left arm. The arm
giving higher readings should be
used for long-term blood pres-
sure monitoring.
Be sure to rest for 5 minutes
before taking blood pressure
measurements.
Do not talk or move during the
measuring procedure. This may
lead to false measurements.
You should take your blood
pressure in a quiet place, in a
relaxed seated position.
You should wait an hour before
taking measurements after
having coffee or smoking.
Do not take your blood pressure
after taking a bath or exercising.
If you feel an urge to urinate,
you should go to the toilette
before taking measurements.

3.3 Setting date and time

The batteries must have been inser-
ted and the device switched off
before you can set the date and
time. Remove the cover of the bat-
teries on the underside of the devi-
ce. Lift one of the inserted batteries
for 1 to 2 seconds, and then push
the batteries back into the com-
partment. Then you can close the
battery compartment. Now the time
function automatically appears. The
display shows the number "31" for
the day and "12" for the month.
The date set is thus the 31st of
December.
130