Placing The Data System - Thermo Scientific iCAP RQ ICP-MS Pre-Installation Requirements Manual

Placing the Data System

Thermo Scientific
For the data system, Thermo Fisher Scientific recommends using one
workbench with minimum dimensions of 1.00 m × 1.20 m. The
workbench must be capable of supporting the weight of the data system
and a printer, if applicable. A printer is not delivered with the
instrument. The iCAP RQ ICP-MS instrument is connected to the
computer via a USB cable, see
Labeled Components: 1=data connection to computer
Figure 2-11. Connections for computer
Figure 2-12 shows typical data system hardware components.
communication
cables USB and
Ethernet
Figure 2-12. Typical data system workbench
iCAP RQ Pre-Installation Requirements Guide (P/N BRE0009927, Revision A)
Figure 2-11.
1
monitor
wall outlet for data system components
120 or 230 V AC
Site Preparation
Placing the System
computer
2-13