Setting Up Your System - i-SENS CARESENS DUAL Owner's Booklet

CareSens Dual Meter Display
Test results
2 3 4 5 6
1
Memory recall mode :
2
results stored in the memory are displayed
1
PP2 alarm :
3
meal alarm has been set
Bluetooth symbol :
8
4
7
Bluetooth® Smart feature is on
10
9 11
Mute symbol :
5
12
13 14 15
sound is set to OFF
Control Solution flag :
6
meter is in Control Solution Test Mode and
16
appears when the control solution test results are saved or displayed
Decimal point
7
Blood insertion symbol :
8
application of a drop of blood or control solution
mmol/L, mg/dL: unit for blood glucose or blood β-ketone
9
alarm: appears when the time alarm has been set
10
KETONE :
appears when KetoSens strip is inserted
11
Battery symbol :
12 indicates meter battery is running low and
needs to be replaced
Pre-meal test flag :
used for tests done before eating
13
Post-meal test flag :
14 used for tests done after eating
Fasting test flag :
15 used for tests done after fasting for at least 8
hours
Month/Day/Hour/Minute
16
Note:
It is recommended to check if the display screen on the meter
matches the illustration above every time the meter turns on.
Do not use the meter if the display screen does not exactly
match the illustration as the meter may show incorrect results.
18 www.i-sens.com
appears when test
appears when the post-
appears when
appears only when the
indicates that the
indicates meter is ready for the

Setting Up Your System

S
Press and hold the for 3 seconds to enter the SET Mode.
After all settings are finished, press and hold the
seconds to turn off the meter.
Press ◀,▶ to change values. Press and hold ◀,▶ to scroll
faster.
Step 1 Entering SET Mode
S
Press and hold the for 3
seconds to enter the SET Mode.
After all the segments flash
across the screen, the 'SET' will
show up.
Press the ◀ or ▶ button to
S
select 'YES' and press the
button to go to the next step.
Note:
Follow steps 2–3 to pair your meter and smartphone. Pairing
allows the meter to communicate wirelessly with your
smartphone. Ensure that devices are within the maximum
Bluetooth range (10 metres). Before pairing your meter and
smartphone, download and install the SmartLog mobile app on
your smartphone.
Setting Up Bluetooth
Step 2 Bluetooth Pairing
If you do not want to connect your meter
1
to your smartphone, press the
the screen shows on the right. The meter will
go to Step 4 Year Setting Mode.
S
button for 3
1
S
button when
www.i-sens.com 19