Adjusting The Date And Time - i-SENS CARESENS DUAL Owner's Booklet

When your meter and
6
smartphone are paired and
connected, the meter will display
'SUCCESS' and the saved test
results will be transferred to your
smartphone.
When the data transfer is
7
finished, the meter will display
'End' on the screen. Press the S
button to go to Step 10 Sound
Setting mode. See page 25. If the
meter displays 'FAIL' and then
'OFF' , repeat steps 2 to 5.
Note:
Some smartphones, especially those that are not tested or
approved by i-SENS, may be incompatible with your meter.
Visit www.i-sens.com/smartlog for more information about
supported smartphones. You can also scan the QR code on the
back cover of this user manual.
22 www.i-sens.com

Adjusting the Date and Time

Step 4 Setting the Year
Press the ◀ or ▶ button to adjust until the
correct year appears. When the present year
S
appears, press the button to confirm your
selection and to go to the next step.
Step 5 Setting the Month
A number indicating the month will blink on
the screen.
Press the ◀ or ▶ button until the correct
S
month appears. Press the
your selection and to go to the next step.
Step 6 Setting the Date
Press the ◀ or ▶ button until the screen
displays the correct date. Press the
confirm the date and to go to the next step.
button to confirm
S
button to
www.i-sens.com 23