Inserting Or Replacing The Batteries - i-SENS CARESENS DUAL Owner's Booklet

CareSens Dual Blood Glucose/Blood β-Ketone Monitoring System
CareSens Dual System includes the following items:
* CareSens Dual Blood Glucose/Blood β-Ketone Meter
* Owner's Booklet
* Batteries
Optional items:
* CareSens PRO Blood Glucose Test Strips
* KetoSens Blood β-Ketone Test Strips
* Quick Reference Guide
* Lancets
* Lancing Device
* Logbook
* Carrying Case
• Check all the components after opening the CareSens Dual
Blood Glucose/Blood β-Ketone Monitoring System package.
The exact contents are listed on the main box.
• The cable for data management software can be ordered
separately. Please contact your authorised i-SENS sales
representative.
10 www.i-sens.com

Inserting or Replacing the Batteries

The CareSens Dual meter uses two 3.0 V lithium batteries. Before
using the meter, check the battery compartment and insert
batteries if empty.
When the symbol appears on the display while the meter
is in use, the batteries should be replaced as soon as possible.
The test results may not be saved if the batteries run out.
Step 1
Make sure the meter is turned off. Push the
cover in the direction of the arrow to open
the battery compartment.
Step 2
Remove the used batteries one at a time.
Slip your index finger under the battery to
lift and pull out as shown. Insert two new
batteries with the + side facing up and
make sure the batteries are inserted firmly.
Step 3
Place the cover on the battery
compartment. Push it down until you hear
the tab click into place.
Note:
Removing the meter batteries will not affect your stored
results. However you may need to reset your meter settings.
See page 19.
www.i-sens.com 11