Hi And Lo Messages; Target Blood Glucose Ranges - i-SENS CARESENS DUAL Owner's Booklet

HI and Lo Messages

HI Message
The meter displays blood glucose
results between 1.1–33.3 mmol/L.
'HI' appears when the blood
glucose level is greater than
33.3 mmol/L and indicates severe
hyperglycemia (much higher than
normal glucose levels).
The meter displays blood
β-ketone results between 0.1–8.0 mmol/L. 'HI' appears when the
blood β-ketone level is greater than 8.0 mmol/L.
If 'HI' is displayed again upon retesting, please contact your
healthcare professional immediately.
Lo Message
'Lo' appears when a blood glucose test result
is less than 1.1 mmol/L and indicates severe
hypoglycemia (very low glucose levels).
If 'Lo' is displayed again upon retesting,
please contact your healthcare professional
immediately.
Note:
• In case of blood β-ketone test, 0.0 mmol/L appears when a
test result is less than 0.1 mmol/L.
• Please contact your authorised i-SENS sales representative if
such messages are displayed even though you do not have
hyperglycemia or hypoglycemia.
46 www.i-sens.com

Target Blood Glucose Ranges

Reminders
Time of day
Before breakfast
Before lunch or dinner
1 hour after meals
2 hours after meals
Between 2 a.m. and 4 a.m.
Expected Values : The range of a normal fasting* blood glucose
level for non-diabetic adults is between 3.9–5.5 mmol/L. Two (2)
hours after a meal, the range of a normal blood glucose level for non-
diabetic adults is less than 7.8 mmol/L.
*Fasting is defined as no caloric intake for at least eight (8) hours.
Reference
American Diabetes Association. "Standards of Medical Care in
Diabetes -2016. " Diabetes Care. January 2016; 39(1):S15, S100.
Transferring Test Results Using Cable
Test results stored in CareSens Dual meter can be
transferred from the meter to a computer using SmartLog
software and cable. The meter screen displays 'Pc' when
it is connected to the computer using the data cable. For
more information, contact your authorised i-SENS sales
representative or visit www.i-sens.com.
Note:
Test results can also be transferred wirelessly using
Bluetooth. To pair the meter and your smartphone, see page
19.
Your target ranges
from your healthcare professional
www.i-sens.com 47