Option 400, Standard 4-Port Configuration; Option 419, 4-Port With Extended Power Range And Bias Tees; Option 423, 4-Port With Combiner, And Source Switches; Option 551, N-Port Calibrated Measurements - Agilent Technologies N5242A Service Manual

General Product Information PNA Series Microwave Network Analyzers
Analyzer Options Available N5242A

Option 400, Standard 4-Port Configuration

This is a 4-port network analyzer with an upper frequency limit of 26.5 GHz. This is the
standard 26.5 GHz 4-port analyzer and contains:
• two internal sources
• a reference mixer switch
• configurable test set

Option 419, 4-Port with Extended Power Range and Bias Tees

In addition to the Option 400 hardware, this 26.5 GHz 4-port analyzer contains:.
• four source attenuators
• four receiver attenuators
• four bias tees

Option 423, 4-Port with Combiner, and Source Switches

In addition to the Options 400 and 419 hardware, this 26.5 GHz 4-port analyzer contains:
• one source combiner
• four source bypass switches

Option 551, N-Port Calibrated Measurements

This option allows your analyzer to make calibrated measurements on any number (N) of
ports.

Option 897, Built-In Tests for Commercial Calibration

This option enables performance tests that are built into the analyzer that enable you to
perform ISO 9001 commercial calibration of your analyzer. Refer to "Calibration Options"
on page 2-7 for a description of the commercial calibration.

Option 898 Built-In Tests for Standards Compliant Calibration

This option enables performance tests that are built into the analyzer that enable you to
perform ISO 17025 and ANSI Z540 standards compliant calibration of your analyzer. Refer
to "Calibration Options" on page 2-7 for a description of the standards compliant
calibrations.
2-6 Service Guide N5242-90001