Agilent Technologies N5242A Service Manual page 151

PNA Series Microwave Network Analyzers
N5242A
Rear Panel Interconnects The rear panel includes the following interfaces:
USB x4 Four universal serial bus (USB) jacks (industry standard 4-pin connectors).
GPIB (0)
A 24-pin, female, type D-24 connector that meets IEEE-488 standards.
Controller
GPIB (1)
A 24-pin, female, type D-24 connector that meets IEEE-488 standards.
Talker/Listener
A standard 8-pin, 10/100BaseT, Ethernet connection. It auto selects between
LAN
the two data rates.
A 15-pin, female, D-sub connector that provides a video output of the
Display (VGA)
analyzer display that can be viewed on an external VGA monitor.
A51 Hard Disk Drive
The hard disk drive assembly (HDDA) is an integrated development environment (IDE)
data storage device which is connected directly to, and physically mounted within the
enclosure of, the A17 CPU board. The full operating system and firmware for the network
analyzer is stored on the A51 hard disk drive.
Service Guide N5242-90001
Digital Processing and Digital Control Group Operation
Theory of Operation
5-33