Display Functions - Deif GC-1F Operator's Manual

GC-1F operators manual 4189340748 UK

3.1.4 Display functions

The display indicates both readings and alarms. The examples below are with icons and English language.
GC–1F
HW x.xx
SW x.xx
Fuel level
Oil press
Water
RPM
1 0 d
2 0 d
Run hours
Alarm list
High Battery
Ack
Parameter
D+ delay
0.0 s 10.0 s
Min. value
Actual value
DEIF A/S
Type, hardware and software version.
80 %
2.0 bar
Fuel level, oil pressure, water temp. and RPM.
90°C
0
0 h
0 h
Service timer 1 and 2.
24 h Run hours.
Press
2 alarm(s)
Active alarm list. The alarm list pops up automatically when an
alarm appears. When the arrow is present, more alarms are ac-
tive. Press ▼ to scroll through the list. Exit the list by pressing
ESC.
2 alarm(s)
Press
Parameter example: D+ delay setting. Use ▲ or ▼ to scroll
through the settings list. If change of settings is necessary,
100.0 s
press
values. Use ESC to leave settings.
Max. value
Push-buttons, LEDs and display
to enter the list of active alarms.
to enter the parameter setting.
and enter the password. Then use ▲ or ▼ to change
Page 8 of 9