Changing Station Order; Viewing Station Information; Storing Preset Stations - TechniSat DIGITRADIO 580 Instruction Manual

Changing Station Order

You may want to display the stations in different order.
1. Press MENU button, turn SCROLL/SELECT/SNOOZE knob to select 'Station order', and
then press SCROLL/SELECT/SNOOZE knob to confirm.
2. Turn SCROLL/SELECT/SNOOZE knob to select 'Alphanumeric', 'Ensemble' or 'Valid', and
then press SCROLL/SELECT/SNOOZE knob to confirm your selecting option.
Alphanumeric
Ensemble
Valid

Viewing Station Information

DAB/DAB+ stations broadcast additional information. Press INFO button repeatedly while a
program is playing to view information through DLS (Dynamic Label Segment), Ensemble,
Program Frequency, Signal Quality, Signal Strength, Bitrate, Codec, Channel and Date.
Showing Signal Strength
While you selected signal strength, a signal bar with the strength of the current station will show
on the display.

Storing Preset Stations

Your radio can store up to 12 of your favourite DAB/DAB+ stations. This will enable you to access
your favourite stations quickly and easily.
1. While playing your favourite station, press and hold PRESET button until display shows as
below:
2. Turn SCROLL/SELECT/SNOOZE knob to cycle through the preset numbers 1-12.
3. Select one preset number and then press the SCROLL/SELECT/SNOOZE knob, display will
show 'Preset stored'.
4. Preset number 'P#' will show on the display.
Display all stations in alphanumeric order.
List currently broadcasting active stations before inactive ones.
Remove inactive stations from the station list.
The indicator on the signal bar shows the
minimum acceptable signal level.
#
Note: Stations with signal strength below the
minimum signal level may not provide a
steady stream of audio.
27