TechniSat DIGITRADIO 580 Instruction Manual page 11

#
Note: If a password (WEP/WPA) isn't required by your network, radio will connect
to the network automatically.
a. Turn SCROLL/SELECT/SNOOZE knob to cycle through the alphanumeric
character list, press SCROLL/SELECT/SNOOZE knob to select an appointed
character.
#
Note: WEP/WPA pass codes are case-sensitive.
b. If a wrong operation is being conducted, select
character.
#
Note:
radio will automatically save the WEP/WPA you've input, so no bother to
re-enter these codes.
c. After selecting the final character of your password, turn
SCROLL/SELECT/SNOOZE knob to
SCROLL/SELECT/SNOOZE knob to confirm. The radio is connected to wireless
network.
2) If you wish to establish a connection via WPS, press SCROLL/SELECT/SNOOZE knob
after you have selected desired network. The radio then offers the option to initiate WPS.
Turn SCROLL/SELECT/SNOOZE knob to select through Push Button, Pin and Skip
WPS, press SCROLL/SELECT/SNOOZE knob to confirm.
Push Button
Pin
Skip WPS
= Backspace;
You must start the WPS scan on the remote station (e.g. router).
Consult the manual for your router or Access Points (AP) to learn
how to do this.
After you have done this, press SCROLL/SELECT/SNOOZE knob
on the radio and then both devices will establish a connection.
The radio creates an 8-digit number, which you then have to enter
into the remote station.
After entering the PIN, press the SCROLL/SELECT/SNOOZE
knob to establish the connection between both devices.
In addition to a WPS connection, you can also establish a
connection using a Pre-Shared-Key. The required key is often on
the rear of the router, or you may have defined it yourself.
This method is used automatically for networks without WPS. You
can call up the Pre-Shared-Key function on networks with WPS by
selecting menu item 'Skip WPS'.
An input field should now appear. You can enter the required key
(PSK) by turning and pressing SCROLL/SELECT/SNOOZE knob,
and then select 'OK' and press SCROLL/SELECT/SNOOZE knob
complete the entry. The radio should now establish the connection
to the network.
to delete designated
means return to previous track;
, and then press
11