Getting Started - TechniSat DIGITRADIO 580 Instruction Manual

Getting Started

Carefully remove your radio from the box. You may wish to store the packaging for future use.
What you can find inside of your package
" Main unit
" Power adaptor
" Remote control
Instruction manual
"
Positioning your Radio
Place your radio on a flat / stable surface that is not subject to vibrations.
Avoid the following locations:
" Where the unit will be exposed to direct sunlight.
" Where the unit will be close to heat radiating sources.
" Where the humidity is high and ventilation is poor.
" Where it is dusty.
" Where it is damp or there is a possibility of water dripping or splashing onto unit.
LAN Setting:
! Make sure the internet environment is ready and the network settings is available for LAN
(ADSL or Cable Modems is highly recommended).
! To find the Radio's LAN MAC address, Please follow: Main menu > System settings >
Network > View settings > MAC address.
Wireless LAN Setting
! A broadband Internet connection.
! A wireless access point (Wi-Fi) connected to your broadband Internet, preferably via a router.
! If your wireless network is configured to use Wired Equivalent Privacy (WEP) or Wi-Fi
Protected Access (WPA) data encryption then you need to know the WEP or WPA code so
you can get the radio to communicate with the network.
! If your wireless network is configured for trusted stations you will need to enter the Radio's
MAC address into your wireless access point. To find the Radio's MAC address use menu
items as follows: Main menu > System settings > Network > View settings > MAC
address.
Before you continue, make sure that your wireless access point is powered up and connected to
your broadband Internet, or your LAN cable is setting well. To get this part of the system working,
read the instructions supplied with the wireless access point and LAN connecting are highly
recommended.
8