Table of Contents
Advertisement
10. Service Mode
The following items will be displayed:
•
Type of projector: BARCO Galaxy
•
Software version
•
Network module: yes
•
Proj. address: To change the address of the projector, see Change Projector Address, page 77
•
Installation:
-
front/ceiling
-
front/table
-
rear/ceiling
-
rear/table
•
Baud rate: transfer speed for communication with an IBM PC (or compatible) or MAC. The baud rate of the projector must be
the same as the baud rate of the connected computer. When there is a difference, consult 'Change Baudrate PC' in this chapter.
•
Projector Run Time: gives the total run time since the first start up. All projectors leave the factory with a run time of approxi-
mately 24 hours.
•
Projector Serial number: indicates the fabrication number of the projector. This number can be useful when calling for technical
assistance.
Start Up
1. Push the cursor key ↑ or ↓ to highlight Identification. (menu 10-4)
2. Press ENTER to display the Identification screen. (menu 10-5)
SERVICE
IDENTIFICATION
CHANGE PASSWORD
CHANGE LANGUAGE
CHANGE PROJ. ADDRESS
SERIAL COMMUNICATION
NETWORK
LAMP
MORE...
Select with ↑ or ↓
then <ENTER>
<EXIT> to return.
Menu 10-4
10.4 Password
Overview
•
Change Password
•
Access Control List
10.4.1 Change Password
How to enable or disable the password function ?
This item is password protected when the password strap is installed.
The password function is enabled when the password strap, second switch of S2 on the controller module is installed. Consult an
authorized Barco service technician to change the strap position.
About password types.
3 different password levels are built in, in the projector software.
The different levels are:
•
owner
•
user
•
guest
Depending on your password level some password protected items are accessible and others not. The owner (which has the highest
level) can set up via the 'Access control list' the accessibility of the different items. See 'Access Control List'.
74
BARCO Galaxy
Proj.
address:
001
Soft.
version:
3.0
Network module:
yes
Config:
front/ceiling
Bautrate PC: 9600
text:
on
Serial no:1010200
Run time:
100 h
Select with ↑ or ↓
then <ENTER>
<EXIT> to return.
Menu 10-5
R5976445 BARCO GALAXY 15042003
Advertisement
Table of Contents
