Service Mode; Built-Up; Start Up; Identification - Barco GALAXY R9040310 Owner's Manual

10. SERVICE MODE

Overview
•

Built-up

•

Start up

•

Identification

• Password
• Changing Language
• Change Projector Address
• Serial Communication
• Lamp
• BARCO Logo
• Add-Ins
• Preset Input Balance
• Diagnosis
10.1 Built-up
Built-up
The service menu is built-up in two parts which are connected together with the 'more' item. If the desired item is not in the list of
the displayed menu, select 'more' with the cursor key and push ENTER to display the other items in the service menu.
10.2 Start up
Start up
1. Push the cursor key ↑ or ↓ to highlight Service. (menu 10-1)
2. Press ENTER to display the service mode menu. (menu 10-2)
ADJUSTMENT MODE
Select a path from below :
RANDOM ACCESS
INSTALLATION
SERVICE
Select with ↑ or ↓
then <ENTER>
<EXIT> to return.
Menu 10-1
Some items in the Service mode are password protected (when the password function is active). Enter the
password to continue. All other password protected items are now available if you stay in the adjustment
mode.
10.3 Identification
What can be seen on the identification screen?
The identification screen shows the general information of the projector.
R5976445 BARCO GALAXY 15042003
SERVICE
IDENTIFICATION
CHANGE PASSWORD
CHANGE LANGUAGE
CHANGE PROJ. ADDRESS
SERIAL COMMUNICATION
NETWORK
LAMP
MORE...
Select with ↑ or ↓
then <ENTER>
<EXIT> to return.
Menu 10-2
SERVICE
BARCO LOGO
ADD INS
PRESET INPUT BALANCE
ADVANCED PROCESSING
DIAGNOSIS
MORE...
Select with ↑ or ↓
then <ENTER>
<EXIT> to return.
Menu 10-3
10. Service Mode
73