Stereo Options; Running In Stereo Mode; Start Up Of The Stereo Options - Barco GALAXY R9040310 Owner's Manual

8. Random Access Adjustment Mode
How to set up the desired aspect ratio ?
1. Push the cursor key ↑ or ↓ to highlight Aspect Ratio. (menu 8-45)
2. Press ENTER to scroll between [5:4], [4:3], [16:9], [2.35], [1.88] or [1.78].
GEOMETRY
SHIFT
SIZE
SIDE KEYSTONE
BLANKING
ASPECT RATIO [4:3]
Select with ↑ or ↓
then <ENTER>
<EXIT> to return.
Menu 8-45

8.5 Stereo Options

Overview
•

Running in Stereo Mode

•

Start up of the Stereo Options

• Turnover Point
• Stereo Phase
• Invert Stereo
• Stereo Timings
8.5.1 Running in Stereo Mode
Stereo Options are only available when running in Stereo Mode
Stereo Phase, Invert Stereo and the Stereo Timings menu are only available when running in Stereo Mode.
When running in Mono Mode these items will be grayed out.
When does the projector run in Stereo Mode ?
• It is possible to program a Turnover frequency for the BARCO Galaxy projector, when a source is detected with a vertical
frequency that exceeds this Turnover point the projector will switch from Mono Mode to Stereo Mode.
• Going in Stereo Mode will enable Stereo Phase, Invert Stereo and the Stereo Timings menu, at the same time the Geometry
Adjustment menus and Gamma Menu are disabled.
8.5.2 Start up of the Stereo Options
Start up
To enter the Stereo Options, handle as follow:
1. Push the cursor key ↑ or ↓ to highlight Stereo Options. (menu 8-46)
2. Press ENTER to select.
The Stereo Options menu will be displayed. (menu 8-47)
RANDOM ACCESS
ADJUSTMENT MODE
FILE SERVICE
PICTURE TUNING
GEOMETRY
SCENERGIX
PIP
STEREO OPTIONS
Select with ↑ or ↓
then <ENTER>
<EXIT> to return.
Menu 8-46
56
STEREO OPTIONS
STEREO PHASE
INVERT STEREO [ON]
STEREO TIMINGS
TURNOVER POINT: 075 Hz
Select with ↑ or ↓
then <ENTER>
Program the frequency
with numeric keys
<EXIT> to return.
Menu 8-47
R5976445 BARCO GALAXY 15042003