9. Installation Mode
Possible results for the fixed input slots (1&2).
Source
RGB analog
Component Video
RGB analog with tri-level-sync
DVI
6
Video or S-Video
What if a switcher is connected to the projector ?
If a RCVDS (switched on) or VS05 is connected to the projector, it will be also indicated on the menu by adding +800 peripheral.
If no 800 peripheral indication is made on the menu, there are still two possibilities, no RCVDS or VS05 connected or RCVDS is
switched off.
When a 800 peripheral is connected to the projector, the input slots are not accessible with the cursor key to toggle their function.
9.3 800 peripheral
Overview
•
Defining the output module of the RCVDS05.
•
Defining the Infrared Communication protocol
9.3.1
Defining the output module of the RCVDS05.
Which module are available?
When a RCVDS05 is connected to the projector, the type of output module of this RCVDS05 has to be defined in the 800 peripheral
menu.
•
standard output module
•
5 cable output module
6. Only available on Input 1 when an optional decoder is installed.
64
Indication
RGB-SS[CV] : separate sync is composite video on H/C input
RGB-SS[HS&VS or CV]: separate sync is horizontal and vertical sync
RGB-SOG : sync on green
Component video - SS : Component video with separate sync
Component video - SOY : Component video with sync on Y
Component video - 3LSS : Component video with 3 level separate sync.
Component video - 3LSOY : Component video with 3 level sync on Y.
RGB-SS[3LSS] : RGB with separate Tri level sync.
RGB3L-SOG[3LSOY]: RGB with Tri-level sync on green.
DVI
Video
S-video
R5976445 BARCO GALAXY 15042003