Turnover Point; Stereo Phase - Barco GALAXY R9040310 Owner's Manual

8.5.3

Turnover Point

What can be done ?
It is possible to program a Turnover frequency (75 to 110 Hz) when a source is detected with a vertical frequency that exceeds this
Turnover point the projector will switch from Mono Mode to Stereo Mode.
Turnover Point
1. Push the cursor key ↑ or ↓ to highlight Turnover Point. (menu 8-48)
2. Press ENTER to select.
3. Use the ← or → keys to highlight the desired digit.
4. Use the ↑ or ↓ keys to adjust the value of the selected digit.
5. Press ENTER to apply the V Frequency adjustment.
STEREO OPTIONS

STEREO PHASE

INVERT STEREO [ON]
STEREO TIMINGS
TURNOVER POINT: 075 Hz
Select with ↑ or ↓
then <ENTER>
Program the frequency
with numeric keys
<EXIT> to return.
Menu 8-48
8.5.4 Stereo Phase
What can be done ?
With Stereo Phase it is possible to apply an adjustable time delay on the stereo emitter signal.
Image 8-8
Stereo Phase Adjustment
R5976445 BARCO GALAXY 15042003
8. Random Access Adjustment Mode
57