2.3 Additional install options
Overview
1.
Installation of an optional input board (e.g. Quad DP 1.2 input or the SFP input ) or replacing an input
board.
•
for removal see
"Removal of an input board", page
•
for installation see
•
for configuring the SFP input see
2.
Installation of the WiFi & GSM module. For installation instructions see installation manual of the WiFi &
GSM module.
3.
Installation of the distance meter module For installation and adjusting instructions see installation
manual of the distance meter module.
4.
Installation of the external cooler module For installation and adjusting instructions see installation
manual of the external cooler module.
Note: The external cooler only applies to the UDM-4K22 and W22, and can only be used after
physically upgrading the device for the external cooler.
"Installation of an input board", page
"Pulse SFP input use cases", page
55.
53.
79.
Installation process
R5911438 /08
UDM
27