Load And Eject Positions - Epson Fast T-Jet 3 PLUS User Manual

T-Jet3 PLUS User's Manual
When an Ink light (or multiple lights) start fl ashing, press the Ink button once to
raise the Print Head from the Capping Station. Then press the Ink button again to
lower the Print Head. The fl ashing Ink light(s) should stop.
If the Ink lights still indicate an error condition:
1. Press the Ink button once (do not hold in).
The print carriage will move a few inches to the left.
2. When the print carriage stops, press the ink button once more.
The print carriage will move back to the capping station and dock back to
it's original position.
When the ink button light stops fl ashing, the reset is complete.

Load and Eject Positions

Throughout this Manual, and in the various Technical Updates we publish, you
will notice references to the Load and Eject positions of your T-Jet3 PLUS. The
images below illustrate these positions.
The T-Jet3 PLUS in Load position
Version 1.1 Revised July, 2008
The T-Jet3 PLUS in Eject position
20