Loading A Garment Onto The Shirtboard - Epson Fast T-Jet 3 PLUS User Manual

• Power ON your T-Jet3 PLUS. The Print Bed should be fully extended (
DO NOT move the Print Bed by hand. (Refer to Chapter 2 for images of the
Eject and Load positions)
• Shirts can be full of lint and some shirts have more lint than others. Lint is NOT
your friend. It can get on key components inside the T-Jet3 PLUS, affecting
print quality and printer operation. For best results grab a blank shirt by the
shoulder seams and give it a little shake before you lay it on the Shirtboard.
This will actually help remove wrinkles as well.

Loading a Garment onto the Shirtboard

The T-Jet3 PLUS Shirtboard consists of an adjustable
aluminum base and a non-slip padded surface.
Lay the shirt over the Shirtboard as shown on the
right. Again, please check to make sure that
the collar of the garment is at the top of the
Shirtboard.
Smooth out the garment over the printing surface and fold the remaining
garment under the Shirtboard. Ensure any excess garment is folded under the
Shirtboard.
Chapter 4 - Printing Basics
a a nd nd f f ol old d th the e re rema
43
Eject 2).
main inin ing g