Printing To Fastrip Using Adobe Photoshop; Printing To Fastrip - Coreldraw; Printing Multiple Items On The Print Bed - Epson Fast T-Jet 3 PLUS User Manual

4. Import your image for printing and position the image as you would like it to
print on the non-textile item. For further details, please refer to your FastARTIST
User's Manual.
5. Select File > Print to FastRIP > Position the image and click on the printer icon
located in the Printer Toolbox. This will send the image to FastRIP.

Printing to FastRIP Using Adobe Photoshop

Select File > Print with Preview and click on Page Setup. Click on Printer. In
the Page Setup menu, select your Fast T-Jet printer. Click Properties. Click
Advanced. Set the Page Size. Go to the Printer Features section and select the
Print Mode menu. Scroll down and select the Color Print Mode. Drop down the
Underbase Mode menu to select the Underbase Print Mode. Set the number
of ink passes for the Underbase and Top Colors and click OK. In Document
Properties, set to Landscape or Portrait for Orientation and click OK. Click Print.
Printing to FastRIP – CorelDRAW
Go to File > Print. From the General tab, select your Fast T-Jet printer. Click
Properties. Click Advanced and set the Page Size. Go to Printer Features. Drop
down the Print Mode menu to select the Color Print Mode. Drop down the
Underbase Mode menu to select the Underbase Print Mode. Set the number
of ink passes for the Underbase and Top Colors and click OK. In Document
Properties, set to Landscape or Portrait for Orientation and click OK. Click Print.

Printing Multiple Items on the Print Bed

When printing multiple items simultaneously, you must confi gure FastARTIST or
another graphics application so that each individual image is applied in the
proper location.
1. The total print area of all items must be determined measuring the total
length and height of all the items.
Chapter 6 - Printing on Other Items
73