Print Head Replacement; Support Hours - Epson Fast T-Jet 3 PLUS User Manual

T-Jet3 PLUS User's Manual
14. Turn ON your printer, using the Power switch, but this time DO NOT hold down
the Power button.
15. Press the Power button and allow the printer to go through its start-up cycle.

Print Head Replacement

In the event that you damage the
Print Head by means of a head strike,
the Head will probably need to be
replaced. If you can't get the Head
to print in alignment after numerous
alignment routines, it is most likely
permanently damaged and will have
to be replaced.
By design, replacing the head is fairly
straightforward and should take less
than 30 minutes. Replacement Print
Heads are available from
and come with complete written instructions.
If you are dependent on your T-Jet3 PLUS and cannot afford to be down for a
few days while awaiting a shipped replacement, we recommend keeping a
back-up head in stock.
If you need further assistance, contact Technical Support.
Version 1.1 Revised July, 2008
88