Pack The Printer In Its Original Box; Shipping Procedures - Epson Fast T-Jet 3 PLUS User Manual

T-Jet3 PLUS User's Manual
3. Place a piece of tape across the bulk ink bottles
(having the cleaning solution in them) and adjustable
shelf bracket to secure in place. In the example to the
right, the red dotted line identifi es proper tape
placement.
4. Place a small piece of tape over the breather holes on
the ink bottles.
If you will be shipping the printer via a freight carrier, you must
completely disconnect and remove all Bulk Ink System Bottles and
the Waste Ink Bottle. You WILL NOT ship these items.

Pack the Printer in its Original Box

Failure to do so will void your
warranty.
The T-Jet3 PLUS requires 2 people
to lift. Make sure you observe the
following holding points.
DO NOT lift your T-Jet3 PLUS by the Print Bed. Lift
from underneath the side panels. Lifting by the
Print Bed may cause serious damage.

Shipping Procedures

If you are shipping your printer to another location, or returning it to U.S. for
Warranty or Non-Warranty repair:
Pack only the Printer in the original box
DO NOT include:
▪ Bulk Ink System
▪ Bottles of FastINK
▪ Shirtboards
▪ T-Jet Manual
▪ T-Jet Software/Drivers
Version 1.1 Revised July, 2008
120