Connecting Ink Lines To The Ink Bottles - Epson Fast T-Jet 3 PLUS User Manual

T-Jet3 PLUS User's Manual
10. Attach the
(Yellow Yellow) Ink Line as shown below. This is accomplished by removing the far
left Ink Line from the Ink Line Guide and twisting the two connectors together.

Connecting Ink Lines to the Ink Bottles

11. Connect the
Connectors are color coded to match the Ink Bottle
and Ink Lines easily attached to Ink Bottles by a
basic twist-to-connect system. Please note: that the
White ink bottle uses four connectors.
12. Once the Ink Line is connected, you must
prime the Ink Cartridge. Locate the syringe
included with your Fast T-Jet Kit and insert it
into the bottom of the cartridge. Slowly draw
the ink from the bottle through the tube and
into the cartridge.
During priming, we recommend you unscrew the top of the Ink
Bottle slightly to dissipate any vacuum that may form during this
process. Ensure you draw ink through the cartridge and into the
syringe to eliminate the possibility of air being trapped in the
cartridge.
13. Remove the syringe and place the newly fi lled cartridge into its appropriate
position within the Print Carriage. Each cartridge must be inserted into
its proper position. Use the guide located above the Print Carriage as a
reference.
Version 1.1 Revised July, 2008
Yellow Yellow Ink Cartridge (indicated by the sticker) to the far left
Yellow Yellow Ink Line to the Yellow Yellow Ink Bottle.
18