Nikon A1 Instruction Manual page 54

(8) For channels that directly detect laser, click
channel-skip boxes
tab to set so that laser is not detected.
Note: Channels that catch reflected laser light
are covered with a mask (plate) and
channel data is not acquired. Selecting a
channel-skip box facilitates subsequent
spectrum analysis. The volume of data
is reduced a little.
(9) Click the [OK] button to set the optical path.
19.6 Determine image acquisition conditions.
(3)-1 Live (Starting scanning)
(7)
Acquisition
(3)- 2
Laser power
and Si HV
(2) Selecting a pinhole
Chapter 19. Capturing Spectral Images (Spectral Detector)
on the Binning/Skip
54
(8)-1
(8)-2
(9)
(1) Selecting a transmitted image
A1