Nikon A1 Instruction Manual page 49

(4) Select details about conversion.
[Apply LUTs]:
Select this when you want to convert an image whose contrast is edited by [LUTs].
[Insert Overlays]:
Select this when you want to convert an image that contains a scale bar or measurement result.
Only overlapping images can be saved.
(5) Select a channel to be saved.
[Mono image]: A single channel is saved in monochrome.
[Color image]: A single channel is saved in color.
[Channels merged into color image]: Overlapping images are saved.
(6) To save an image as a TIFF file, specify TIF Compatibility (bit conversion).
[Keep bit depth]:
[Scale 12bit to 16bit]:
[Scale 12bit to 8bit]:
(4)
<Combination of Channel, TIF Compatibility Options, and Insert Overlay>
Mono image
Color image
Channel merged
Channel merged
+ Insert overlay
Image: Image on a single channel
Light yellow: Output in color
Exporting a tif file that contains time lapse images with acquisition time
(1) Right-click on a time lapse image and select [Display ND Information] - [Acq.Time] from the displayed
menu to display acquisition time on the image.
(2) Click at the side of the image frame to set the image display size to 100%.
(3) Select [Edit] - [Create Full View Snapshot] from the menu bar to capture the screen.
(4) Perform Steps (1) to (3) in Chapter 17, "Exporting ND2 Files" to export images as a TIF file.
Chapter 17. Exporting ND2 Files
Saved as a 12-bit file.
Saved as a 16-bit file.
Saved as an 8-bit file.
(5)
(6)
Depth
12 bit
12 bit RGB
Multi tif
12 bit
12 bit RGB
49
12 bit to 16 bit
16 bit
16 bit RGB
Multi tif
16 bit
16 bit RGB
Merged: Overlapping images
A1
12 bit to 8 bit
8 bit
8 bit RGB
Multi tif
8 bit
8 bit RGB