Nikon A1 Instruction Manual page 74

Confocal microscope
Table of Contents

Advertisement

24.4
Perform the advanced settings of large images.
(1) Set the Z series options.
- None:
- Z Series:
- Max IP:
- EDF:
- Z-drive:
- Order:
(2) To close the shutter during stage movement, check the [Close active shutter during stage movement]
checkbox.
(3) Set image overlap correction.
- Overlap:
- No overlap:
- Stitching via:
- Image registration:
(4) Select whether or not to use shading correction.
- Automatic postprocessing:
(5) To acquire multicolor images, set the following options.
- Multichannel capture:
- Optical Conf.:
- Stitch using channel:
(3)
Chapter 24. Capturing Large Images
Z series is not used.
The values set in the Z tab of the ND Acquisition dialog box are reflected. (See 24.2)
Creates the max intensity projection.
Creates an extended depth of focus (EDF) image.
Selects a Z device to be used.
Selects a combination with Z.
Sets the percentage of image overlap correction.
Stitches images without image overlap correction.
Selects how the images are stitched.
Enables image overlap correction (position correction) when stitching images.
Enables automatic post-processing of acquired images.
Checking this checkbox acquires multicolor images.
Selects the optical configuration to be used.
Selects which wavelength of acquired λ to be used as a guideline when
stitching images.
(2)
(4)
74
A1
(1)
(5)

Advertisement

Table of Contents
loading

Table of Contents