Nikon A1 Instruction Manual page 15

4.7 Determine image acquisition conditions and acquire images.
(5)-1 Live (Starting scanning)
(9)
Acquisition
(2)
Selecting a
laser
(4)
Selecting a
pinhole
(7)-1 Selecting resolution
(1) Click the
the software.
Note: If the optical path is not switched to A1, blinking cannot be reset even though the [Laser
InterLocked] button is clicked.
(2) Select the laser and channel to be used.
(3) If you want to acquire a transmitted image together with a confocal image, click the TD [IN] button and
check the TD checkbox.
Note: Before acquiring a transmitted image, turn off the light above the microscope.
(4) Select the laser wavelength to be used from [Pinhole].
Select a pinhole size best suited for the objective with [▲Home].
Chapter 4. Capturing Color Images (Standard Detector)
Checking the
settings
(7)-3 Selecting scan speed
[Laser InterLocked] button to reset blinking and to enable laser oscillation with
15
(1) Resetting interlock
(7)-2 Laser application time per pixel
(3)-1 Selecting a
transmitted image
(5)-2 Adjusting laser power
and HV
(3)-2 Selecting a transmitted image
A1