Leica asp6025 Instructions For Use Manual page 96

5. Operation
The smart screen
(continued)
Stirrer off
96
Stirrer working

Fig. 131
Fig. 132
Fig. 133
Additional functions on the SMART SCREEN
• The stirrer can be started and stopped again.
When the button is colored orange, the stirrer is working
(Fig. 131).
• The retort temperature can be set on the Smart Screen. To
do this, press the SET TEMPERATURE button and call up
the SELECT THE RETORT TEMPERATURE entry window
(Fig. 132).
The temperature of the retort can be entered here.
The possible temperature range is from 35 - 65 °C. If AMBIENT
is selected, the retort is set to room temperature.
• A pressure cycle type can be selected. To do this, press the
SET PRESSURE button and call up the SELECT THE CYCLE
TYPE entry window (Fig.
Then highlight one of the four cycle types (Pressure/Vacuum)
and press OK to confirm.
Instructions for Use V 2.4 RevL - 12/2015
133).