Leica asp6025 Instructions For Use Manual page 35

Unpacking the instrument (
100
ASP6025 Tissue Processor
)
continued
103
101
Fig. 15
101
104
Fig. 16
Installing the monitor
• To do so, lift the monitor out of the foam cushion and insert
it with the notch (103) on the rear side into the matching
bracket (101) (Fig. 15) and hold it securely in this position.
• Now remove the screws (100) and washers from the plastic
bag. These screws are used to fasten the monitor to the
bracket (101).
• Now, fasten the monitor to the bracket by screwing the
screws back into the original threaded bore holes (108) on
the rear side.
• Tighten the screws (100) evenly but not too tightly using
the No. 3 Allen key (104) supplied
• Finally, remove the molded foam cushion (98) by lifting it
off the monitor.
4. Instrument Setup
(Fig. 16).
35