Leica asp6025 Instructions For Use Manual page 36

4. Instrument Setup
Unpacking the instrument (
105
19
105
• Remove the adhesive tape (105) from the lid of the retort
(19) (Fig. 17).
• In the retort, you also have to remove the strip of adhesive
tape (105) that secures the cover of the level sensors
(Fig. 19).
36
)
continued
9
Fig. 17
Removing the transport anchors
• After installing the monitor, you have to remove all transport
anchors (adhesive tape and foam parts).
• First, carefully remove all blue strips of adhesive tape (105)
that secure the doors and the drawer of the instrument.
106
• Then, open the drawer (9) and remove all foam parts there
(Fig. 18). Also remove the six dark gray molded parts (106)
from the necks of the RTU-bottles.
105
Instructions for Use V 2.4 RevL - 12/2015
9
Fig. 18
19
Fig. 19